USB Sound Card

09/14/2014 11:14

Many of us have a pair of headphones connected to the output of the computer sound card us either to enjoy songs, or a game. Very likely your headphones and microphone, which also connect to the appropriate slot your sound card. But at some point broke down the female plug my sound card, and because quite a lot to change the plug when I put the headphones and when the speakers. A small structure is a sound card, USB, with stereo inputs / outputs, button to increase / volume button for volume and mute! When connected Windows will recognize as a sound card! With all the materials to be SMD, the cornered enough and fit into a small plastic box, which by one measure has a cable with USB plug, sound to go acoustic (Left / Right) and condenser microphones. The supply of (as imagined) is done by the USB port. The heart of the integrated circuit is PCM2902 of Burr-Brown by Texas Instruments. It is stereo 16-bit DAC and ADC, fully compatible with USB 1.1. DAC sampling frequencies are 32, 44.1 and 48 kHz, ADC has 8, 11.025, 16, 22.05, 32, 44.1 and 48 kHz. If you want more sound intensity, you will need to connect TDA 7050 amplifier to audio output.

Circuit Diagram:

The audio amplifie is the power amplifier which will amplify the output sound. "UP","DOWN" button for volume high & low respectively. For circuit diagram of audio amplifier visit here : AUDIO AMPLIFIER
The pin configuration of USB interface is shown below:
 
Pin configuration of PCM 2902 is:
 
 

Poll

How Much Helpful this site?

Excellent (17)
Good (6)
Bad (0)

Total votes: 25

Contact

Subham's Electronics Circuits World Shyamnagar, West Bengal, India chatterjee93subham@gmail.com