Mobile Phone Battery Charger with 1.5v Battery

08/07/2015 11:12

Mobile Phone Battery Charger with 1.5v Battery

 
For the cell phone to charge, charger output must be above 4V and can deliver a maximum current of 500mA. This charger circuit will step up the voltage from 1.5V to 5V DC to reach the cell phone charging requirement. The circuit uses only an AA or AAA 1.5v battery (1V to 2.4V).  The charger is composed of simple oscillator, a rectifier, and voltage regulator. The feedback winding F is composed 5 turns of #30 AWG magnetic wire and main winding P is composed of 6 turns of #24 AWG wire. The 5.1V zener diode and 2200uF capacitor regulates the output voltage to ensure proper charging. 
 
The windings are not critical, you can experiment using different number of turns. If ever the charger doesn’t have any output, try to reverse the winding connection.
 
Circuit Diagram:
 

 Note: 
* replace 2200uF capacitor ton 4700uF capcitor for better filtering.
* replace the IN4001 to IN4007

 

Poll

How Much Helpful this site?

Excellent (17)
Good (6)
Bad (0)

Total votes: 25

Contact

Subham's Electronics Circuits World Shyamnagar, West Bengal, India chatterjee93subham@gmail.com